Models > WRS6R3EW2 > Instructions

WRS6R3EW2 Westinghouse Refrigerator - Instructions

All installation instructions for WRS6R3EW2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WRS6R3EW2
526-540 of 706
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bin broke

  • Customer: Alisa from Birmingham AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped into place- no tools

Ice container and auger assembly broke apart

  • Customer: Sandra from Tulsa OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the old container, opened the replacement, put it in and it worked perfectly. Great job! Arrived quickly, well packed and in perfect shape.

Ice door flapper broke in half

  • Customer: James from Atlantic VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

water dispenser in door broke

  • Customer: Jean from Salem VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I watched a "how to repair" video on PartSelect. Everything went just as described until I realized that the actuator I was replacing had two tiny lights with wires attached. Perhaps I ordered the wrong part but it looked like the part I ordered would still fit but just not have the lights. I really didn't think it was necessary to have lights so I used scissors and clipped the wires so I could remove the old actuator. Then I continued to follow the directions in the video and now I have a perfectly functioning water dispenser. My husband was so proud of me! One additional tip- I found it was helpful to use a flashlight so I could see really well.

water leak

  • Customer: Forrest from Gulfport MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
two screws fingers pop the hoses off done in 4 minutes

Drawer was cracked.

  • Customer: Richard from Birmingham AL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled out old drawer. Slid in new drawer.

The ice crusher housing is made of plastic and a piece of it broke off,

  • Customer: JAMES from COOSADA AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

hook broke

  • Customer: Larry from Lincoln NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just installed new shelf

Door made a clicking sound when opening & closing

  • Customer: Bettie from Oxford GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

Broken shelf in the door

  • Customer: Eugene from Holland OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced them

Old one broke

  • Customer: Jacob from Dawson Springs KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I watched the step by step video. I t was a breeze. Thanks for the fast service and number 1 video to show me how to install

Water dripped from water dispenser after use

  • Customer: Jeffrey from Greenfield MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.

Three of the four drawer supports were broken

  • Customer: Linda from Turtle Creek PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

Bottom door bin broke

  • Customer: John from Cape Coral FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
A part replacement. I was extremely happy to find the somewhat obscure part at Parts Select and at a very reasonable price. The part arrived in three days and fit perfectly. Very satisfied!!!

bins had been broken for a while and taped to work.

  • Customer: DERRILL from WEST PALM BEACH FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced old bins with new .Fit like a glove and seemed to be of better material. Delivered with-in a couple of days. Thanks
All Instructions for the WRS6R3EW2
526-540 of 706