Models > WRS6R3EW0 > Instructions

WRS6R3EW0 Westinghouse Refrigerator - Instructions

All installation instructions for WRS6R3EW0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WRS6R3EW0
526-540 of 708
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Tabs that hang the crisper broke

  • Customer: Allen from Eagle CO
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Ordering replacement parts was easy! Expected a simple pull out old plug, insert new plug.... Not sure if it comes from factory like this or if this had been previously repaired poorly, but the broken plug was heavily glued in place. Took some serious finess work to remove without serious damage. Once out, it was simple plug in

bottom bin on refrigerator door

  • Customer: Harold from Oswego NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
simply snapped new bin in place, very easy

NO WATER FOR ICE MAKER OR DRINKING

  • Customer: JAMES from ELLIJAY GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Repair as illustrated was right on. Repair was easy. No problem except still no water for ice or drinking. The valve was not the problem.Filter was replaced prior to valve replacement. Must be a electric switch some where. 3 yrs ago I have replaced the water activation plastic lever for drinking which was a bit difficult and it turned out ok.

Refridgerator side light did not work

  • Customer: Peggy from Alamogordo NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pryed the old loose catch is on the bottom used a common screw driver.pulled the two wires off reversed the procedeure to put the new switch in.took about 5 minutes.

Refrigerator door making noise when opening and closing.

  • Customer: Tom from The Villages FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
Took door off and installed parts. Video on your Webb site show how to do it. Excellent service on shipping .Had parts in two days. Would use your company again if I had any other problems.

Crisper support was missing

  • Customer: Harold from Bartlesivlle OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Installed new support. I placed the new one in the hole provided and taped in the locking peg with a small hammer. The total installation took about three minutes thanks to the excellent video provided on the web site. Thanks

none

  • Customer: Ana from Placentia CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just shapped on the door it was eassy!!!

door closed on open drawer broke lower drawer bin.

  • Customer: John from Garland TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Slid new bin into door retainers. The part was ordered in afternoon and the ordered part arrived the next day normal ground delivery.

Slow Flow of Water

  • Customer: Frank from Brant Lake NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
The water flow on or refrigerator was just trickling out. After trying to make sure there was no kink in hose, I called for replacement. Water flows great now... actually better than when new.

Shelf broke

  • Customer: Edwin from Copperas Cove TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
It just snap on

back clip of shelf broke allowing shelf to tilt

  • Customer: Burke from Norman OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old shelf. Removed glass from shelf. Installed glass in new shelf. Installed new shelf into frig. Returned drawer to bottom of shelf. Super Easy.

bottom door bin broke

  • Customer: Dawn from Kansas City KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
slide the new bin into the door. Took 2 seconds.

ref freezing up and freezer not making ice

  • Customer: melvin from hobbs NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
replace the control panel and harness

the auger assembly broke (my fault) do I had to replace it!

  • Customer: Tim from Carthage MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I was happy you all had the part that I needed and I could easily remove the old one and slide the new one right into place!

broke fan blade while trying to remove dust.

  • Customer: Jack from Kiefer OK
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.
All Instructions for the WRS6R3EW0
526-540 of 708