Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WRS3R3EWC

WRS3R3EWC Crosley Refrigerator - Overview

Get Parts and Repair Help for WRS3R3EWC

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRS3R3EWC, or you can search by name or part description. You can also find your part by where it is located on the WRS3R3EWC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRS3R3EWC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Crisper Cover Support - Front

This part can be used for the front support. Sold individually and mounts to the inside cabinet wall.


Crisper Support - Rear

This part mounts on the inside of the wall. Sold individually.


Water Inlet Valve

This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.


Evaporator Fan Motor Kit - 120V 60Hz

This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.


Hinge Bearing

Sold individually. Also known as a short door closing cam.


Defrost Thermostat Kit

This kit includes the clip, leads and heat shrink.


Door Shelf Bin

Sold individually. Sometimes referred to as the 2-liter bin.


Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.


Ice Maker with Cover - 8 Cube


Dispenser Crusher Housing

This part may look different or be a different color than the original, but will fit and function the same as the original part.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water in Frig was tasting bad.

  • Customer: Patricia from Fulton, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 486 of 487 people found this instruction helpful
I turned the cap for the old filter and pulled it out . Then I put in the new one in and turned the cap to secure it in frig. read more

water leaking out of refrigerator

  • Customer: Jose from Alexandria, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable)
  • 395 of 457 people found this instruction helpful
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in p... read more

water from refigerator dispenser started tasting bad

  • Customer: Anthony from Springfield, VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 353 of 354 people found this instruction helpful
I removed the top shelf in the fridge. I then unscrewed the cover to the water filter and pulled the filter cartridge down into the cover. Keep the cover upright as there may be some water in it. I carried it to the sink. I took the new cartridge and ran water through it from the sink, then set it in the cover and took it to the fridge. I pushed the car... read more