WRS3R3EW7 Westinghouse Refrigerator - Instructions

All instructions included on this site are good. I would add only one thing to them. When removing the 4 water lines from the old unit be sure to pull up on the white rings while you pull down on the water lines. All else is a snap.

I removed the top hinge cover, loosened the hinge so I could remove the door and laid the door on it's side. I removed what was left of the Door Closing Bearing and istalled the new parts. Set the bottom of the door on the lower hinge then postioned and set the top hinge into place and tightened the top hinge and installed the hinge cap.

i was trying to figure it out but eventually it fix it self even when i get the part the problem seems to be fix on its own i unpplug the eletrical cord from the wall for over three hours and plugged back in and after 2 more hours it works so i am confussed dont know what happen i did not change any part so i have one brand new inlet water

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

I followed the instructions on the Video and it was very helpful and I completed the job in 15 minutes. Greatest web site for helping with repairs. I would certainly reccommend this web site to anyone that would perform their own repairs

Ordered the part online and it came the next day. No problem putting in the new bin; it took less than a minute and no tools required.

Easily installed the new ice-maker. Rec'd the part in three days.

Just removed the glass and popped the plastic piece out. The new part fit perfectly. This part came overnight...awesome service, exactly right part, easy to find. Would definitely use them again.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I watched the step-by-step installation video and followed the instructions therein.

I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

I removed the cover on the door to access the levers that dispensed the water and ice. I was able to pull the assembly out far enough to remove the damaged part and install the new one. It was fairly easy because i have small hands and did not need to pull the assembly out too far. Otherwise it went fairly smooth and was done in no time. The fact that I am a woman had no bearing other than the small hands part. My husband could not have changed the part for that reason. The ease in changing the part saved us quite a bit of money by not having to call a repairman. the only authorized repairman is about 40 miles away and with mileage plus installation it would have cost a fortune and being on a fixed income ease of part installation is great for us older people. thanks for great product.

Followed video instruction provided on this site.

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

A friend of our family gave us a nice refrigerator; 2 doors, has ice maker. some parts were missing but through the Parts Select I've been able to purchase online any part needed. Very easy to install and I didn't have any problems with the parts delivered. Fast service and I always get the right part without any delays of returning them. I strongly recommend Parts Select for any person who need to purchase refrigerators parts online.