This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a door shelf bin made for use within some models of refrigerators. This shelf bin is used to hold food items and containers, but if it is cracked or damaged and no longer able to hold any item...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This is a manufacturer-made crisper drawer for your refrigerator. Crisper drawers are used to store fruits and vegetables at different humidity levels than the rest of your fridge. If your current cri...
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This authentic Whirlpool refrigerator part is a door shelf rail. It snaps into your refrigerator door and prevents items from sliding or falling out when your open the door. It is made of plastic and ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jan
September 7, 2021
My ice maker is not releasing the ice what can i do to fix this
For model number WRS321SDHW05
Hello Jan, One of the most common causes of an ice maker that won’t dispense ice is that an ice clump has formed inside. While the auger is designed to unstick these ice cubes from each other, if you aren’t using your ice maker very often, the auger won’t turn on. Over time, this forms into a chunk of ice. Try breaking up the ice chunk with your hands. If that wont work you will need to defrost the ice maker. If you press the lever on your ice dispenser, but it doesn’t make any noise, then it is most likely a problem with the motor responsible for turning the auger. Part number PS12711448. It could also be that the Ice Bin Auger Drum has worn out part number PS372186. We hope this helps!
The bottom crisper drawer has broken all the way down the right side. I have tried to superglue it together with no success. Is there a replacement drawer available? The part number is W10905530 M4 1.
I appreciate your help in this matter.
Thanks,
Stephanie
For model number WRS321SDHW05
Hi Stephanie, thank you for reaching out. The crisper drawer compatible with your model is part number PS12347929. Glad to be of help!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
The repair was actually easy; however I have an ice dispencer/crusher attached and the which the diagram supplied with the part did not include. I had to make several calls before I was e-mailed the diagram. Suggestions: note that the screw at the end of the auger goes in the reverse direction (this took me about 20 minutes to fi
... Read moregure out even though it was shown in the diagram). Also, be sure to keep the ice crusher parts in order and be sure the white plastic tab on the crusher fits into a depression in the housing. I did not notice this and had to take it all apart and redo the install. It works great!!!