WRS26MR4JW1 Crosley Refrigerator - Instructions

Pulled out the fridge from the wall, unplugged it, and turned off the water supply. Took off the cardboard backing at the bottom of the fridge. Cleaned the dust and gunk. Unscrewed the old valve. Unplugged the 3 electrical connections. Since the new fittings for the water lines were different, we unscrewed the old ones, lopped off the nipples, and inserted the ends of the water lines into the new connections (they were super easy - just push the line in until it clicks). Reattached the valve. Reattached the cardboard. Turned water back on, and plugged in the fridge. Our ice maker still didn't make cubes, though. So I took out the fill valve from the top rear of the fridge. It had a tiny piece of ice lodged in the bend of the back, right above where it connected to the water line. I rinsed it out, reinstalled, and now we have a full bucket of ice!!

problem still persists part did not fix problem. made repairs recommended per your site.

replaced ribon i have an enginers degree in electronics so it was pretty simple for me to just unplug the old cable and plug the new one in

I was very thankful for the video that popped up when I ordered the crisper support part. It described exactly how to remove the damaged support without further damaging the inside of my regrigerator. I had the supports out and ready to go when my new part arrived. It took two minutes to do it the way it was described in the video and it worked like a charm. Thanks for the great tutorial and for putting it in a place that was accessible. Parts arrived very quickly as well. I didn't order enough supports so I had to re-order and they came quickly also.

Great job. Part arrived before promised. Packaged well. And most important...I actually got what I ordered. A pleasure doing business with you. Gene Lucarini

removed the old one & put the new bin in

Turned off the water supply ,pulled the plug removed two screws to access theater lines the new valve body was a little different than the original I had to cut off the end of each hose and push them in to the new connections the hoses are size and color coded replaced the two screws put the water line on plugged it in and turned on the water checked for leaks twice and replaced the back cover

Open package slide new bins in. That easy

I simply replaced the broken drawer/pan guide and installed new pan/drawer. No tools needed as the parts literally slipped in place.

After removing the lower section which just snapped out I went to remove the three screws on the bottom of the water/ice dispenser. The only problems I had we're here in that the screws were rusted and difficult to get out with water falling into this area over time. Then I easily removed the three screws holding the motor and actuator. Of course there was three more screws holding the water dispenser actuator in place. I took the broken piece out and put it all together again but placed some rust resistant screws I had to replace the three rusted screws. Works great!

service was great-got filter promptly- on line instructions very helpful. showed how to turn off water, remove filter and replace with new one. no problems.

Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!

Went on your website, originally ordered wrong part, upon discovering my mistake you immediately voided that purchase and then I ordered the correct part. Very professional and easy.

order ice container and auger assembly

ice maker= replaced overload,microswitch and solenoid water valves.refrigerator=replaced the thermostat.Great price on parts,very fast delivery and parts were a perfect fit.You made the job very easy. John