WRS26MF8JS2 Crosley Refrigerator - Instructions

take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .

locating the part was simple order was simple showed up the next day wow what good service. jim anderson happy customer.

Followed the video instructions and it took less than 10min. The part I used worked fine even though it was not the correct one for the location. There are 4 supports: 2 at the front and 2 at the rear and they have different shapes. The one that was broken was one of the front ones and the parts I ordered turned out to be for the rear. In any case it worked fine. The front part is called crisper cover support - PS2358880. The video repair is one of the best repair tools I have seen. I have not replaced the filter yet but I am familiar with the procedure and the video is of great value.

Placed replacement shelf on the mounting brackets.

The repair was very simple and watching the repair demo insured it would be. Received parts with in 4 days of ordering. Removed old shelf, took out phillips retaining screw and discarded old rails. installation was the reverse process.

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

No problem! Opened the package, took out the plastic bin and attached it to the door. Excellent service and really quick on the delivery. Thank you...

I changed the valve but still no ice, changed the filter also. think it was just froze. could have saved me 70 bucks

Purchased a replacement part only to find the new part had push on fitting and my part has screw on fittings. Went to Youtube where Partselect had a video on how to replace the part from screw fittings to push on fittings

Ordered on line and replaced in a matter of minutes. Since this is the second one that has broken, I ordered a spare this time.

recieved the part in a couple of days part just slipped into slots. The new door was slightly different but did fit

Fortunately, this was not hte first time to do a repair on the through the door dispensers. I turned the unit off and removed the door tray (slides out) to expose the screws for trim removal. When that is removed, you remove the circuitry and then remove the actuator and spring. It was difficult to get the new actuator in place. the "stop" which holds it in pace is not forgiviing! And that is being mild. (I remember a few explitive delitives I thought wer gone foreever! I reconnected the circuit to the panel, replaced the panel, and the tricky part was to reinsert the water hose into the dispenser hole. Good luck. When that was in, the entire unit was reeturned with the four screws. The front trim panel was replaced with four screws, and the slide in drip tray was slid in. Job done, and the power was restored. Thank goodness I had some long hemostates to control the reinsertion of the water tube!

Remove the rails, and replace. Less than 5 min repair. VERY costly though for 2 pieces of plastic.

My brother-in-law was the real hero here, he's quite the handy man. Once we realized that the loud noise and lack of cooling was the failed motor in the air damper unit we ordered the replacement after taking the entire unit and arm out of the fridge. Removing the entire damper unit was the only hard part due to the adhesive to the plastic mounting and Styrofoam insulation. Once out, we put the replacement in, reconnected the power switches and reseated the entire control unit arm into the fridge. The noise was gone and after a day the temperature in the fridge was back to 39 degrees Farenheit.

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.