WRS26MF8JS1 Crosley Refrigerator - Instructions

Turned off the refrigerator, removed the bottom drawer from refrigerator, then removed the glider bars for the drawer on the left side where the filter chamber is. Removed the filter and then removed the plastic peace guarding the filter chamber. Once that was all removed we removed the screws holding the filter base in place. Now that everything was exposed we removed the inlet and outlet lines from the filter base by pushing in the nobs inside the base and pulling the lines out with some slight elbow grease. After that we just proceeded in reverse. We plugged the filter in after the base was secure to make sure that the fix worked. The repair worked like a charm, was relatively simple and now our fridge is all better with water and ice without a large repair bill :o)

Replaced

it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks

The repair literally to 5 minutes. Remove one shelf, slide new one in. Simple repair.

replaced with screws driver and removed the old one put the support.thank for fast service.

Glued it back with model airplane cement. Unfortunately, I ordered a replacement part before I remembered to try the glue.

Thanks for the great service, my part arrived the next day!!

It just slides in place!! The unusual thing was delivery; I ordered it late one afternoon with the least expensive shipping. My wife called the next morning to tell me that she received it and installed it. At most 1/2 day for shipping!!

Removed old water pump and cut off ends of all lines. Plugged them into each water inlet/outlet and turned it on. Instant water to dispenser but took about 6 hours for ice maker to get water. Had to prime the ice maker. Works great and saved a lot of money ordering parts from you. Thanks.

just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.

husband did it took only a few min part was easy to find

Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.

Took out the broken ice container, turned off the ice maker, located the problem, called this company, part ordered and shipped within 3 days, and replaced the ice container simply by installing it in its slot. Working great thanks to the knowledgable folks at parts select.

removed old air damper, installed new one. one nut driver, 5 screws. replacement had motor and switch included. $80 delivered ups 1 day.

I am a 65 year old woman with no mechanical aptitude: I just unplugged the frig. And used a screw driver to pry of the plastic socket from its outside edge. . Then you just unplug two tiny contact plugs that appear when you pull out the socket and replug in those two the same way on the new part. Pop the socket back into the hole . . . . And screw in the new bulb. I knew I needed the socket part cause when the bulb burned out , a new bulb still did not work. . . If I can do it, anyone can!