WRS26MF5ASH Westinghouse Refrigerator - Instructions

Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.

Replaced bin in door. Noi tools needed

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

simply took the screws out of the top of the door(after first emptying the door), picked it up off the bottom support and laid it on the counter. Used a needle nose pliers to remove what was left of the bottom bearing and replaced it with the new bearing. Placed it back on the support and put the top door mount back where it belonged. replaced the plastic hinge cover and it was as good as new. Really very simple.

A part replacement. I was extremely happy to find the somewhat obscure part at Parts Select and at a very reasonable price. The part arrived in three days and fit perfectly. Very satisfied!!!

Replaced old bins with new .Fit like a glove and seemed to be of better material. Delivered with-in a couple of days. Thanks

not much to putting a bin in just insure it is in clips correct and your done.what I was amazed with was the ease of getting correct cut sheet to order part and no drawn out 2 page forms to become a member and it arrived ups which is not always easy in alaska and was on my door step when we got back from a week trip out snowmachining. this was the most accurate and easiest part I have ever ordered, and I work on the supervision end of construction and spend so much wasted time ordering over the internet when I have to

I ordered a extra bin for the door. I ordered the wrong one the top bin and the bottom two are made different. I didn't notice that. The person I talked to was very kind and helpful. Also I have never received a product as fast as from this company. Great service. Thank you.

Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.

Remove and replace broke items. Crisper pan was the easy, just take the old one out and put the new one in. , The slider on the crisper was easy, just pop it out and reinstall. The front ice container was unscrew the screws and remove and replace old with the new. And insert the screw back in. Of course common sense tells you to dump the ice out of the ice containter first. Make sure everything lines up

Removed old one inserted new one . 15 seconds was done

Removed shelf and rails. Removed screws from the sides. Removed old broken rails. Mounted replacement rails and secured with screws. Mounted shelf back in refrigerator. Important!! Sanded down the rough edge of the original tray which had cut through the plastic rails. then I lubricated the sides with a small amount of lithium grease.Mounted the drawer and was incredibly impressed by the ease of operation!It is sooo smooth!

take out the old....put in the new...couldn't be easier!

I simply pulled out the ice container and auger assembly and,after washing the new one, Iput the new one in and it worked immediately. It couldn't have been any simpler.

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.