WRS26MF5ASG Westinghouse Refrigerator - Instructions

I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.

Although I hated spending nearly $100 for two fridge parts...I was delighted with how the process worked! The website was easy! The parts came quickly! They were correct and EASY to install! My wife and I are VERY happy with our experience!

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

Fit perfectly

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

Ordered the new part. The pictures online were most helpful. Just compare the old part to the picture, place the order, wait two days, receive the package, open it and slide the new part in place. Very easy.

just snapped part unto door.

Ordered and received new shelf. Replacement took about one minute.

Had them in a couple of days. Very impressive. I've recommended this site to many friends.

By removing the old water filter and installing the new one

Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.

Replaced bin in door. Noi tools needed