WRS26MF5ASA Westinghouse Refrigerator - Instructions

The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

Fit perfectly

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

Ordered the new part. The pictures online were most helpful. Just compare the old part to the picture, place the order, wait two days, receive the package, open it and slide the new part in place. Very easy.

simply put new bin on the door. removed door and popped on the new gasket. 30 min. total. service from partselect was very good.

The shelve bin tabs broke because they don't snap in properly so they get knocked out occasionally. They hit the floor and if what's in the door is heavy and lands on them they break. Snapping in a new one is not a problem, it's ordering/paying/shipping/waiting. They need re-designed so they fit more securely.

just pull out broken crisper, and push in new crisper drawer.

Remove broken shelf and install new shelf. And that's it

the parts where a perfect match and they snapped in place

The dirt drawer I received got broke during shipping but was quickly replaced, thank you :)

Called a repair man. He said it was a a sensor type valve at the bottom back of fridge and he would have to order. He never called us, so we went to website and ordered it. Replaced it. It WAS obviously burned out/dicolored. Bracket had to be redone, as it wasn't standard. Didn't work. Ordered new icemaker. Worked like a charm. Video for installing icemaker very helpful. He called a couple weeks later and we already had it fixed.

My warranty didn't cover these types of breaks, so I found this website (PartsSelect.com) (it was 1/2 the price of Frigidaire who said no one else made it). Make sure you get the right bin as the bottom two are the same ones. Anyway, it fit perfectly, was in great clean condition, and I haven't had any issues with it since. The shipping time was nominal. I'm in Virginia. I'd buy another part from them any day.

took longer to open the door than to install. Perfect replacement part