WRS26MF5ASA Westinghouse Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
pegs on shelf support and door bin were broken during a relocation
The door bin was an easy fix, just slip the edges into the raised supports of the door.
However, replacing the pegs which support the crisper bins, was a lot more difficult. Removing the old peg was not as easy as one might think. Because the pegs were broken, there was nothing to grab hold of. Having the replacement peg was helpful in determining how the old one was attached to the refrigerator wall. I needed to get a small blade screwdriver, and also a thin pocketknife blade, behind the base of the peg and wiggle them enough to get hold of it with the tip of needle-nosed pliers. The peg broke off in several pieces. Some I could remove by snapping them off and others had to be pushed in behind the refrigerator wall because there was no way to get hold of then. Once that was done, the new peg popped easily into place.
However, replacing the pegs which support the crisper bins, was a lot more difficult. Removing the old peg was not as easy as one might think. Because the pegs were broken, there was nothing to grab hold of. Having the replacement peg was helpful in determining how the old one was attached to the refrigerator wall. I needed to get a small blade screwdriver, and also a thin pocketknife blade, behind the base of the peg and wiggle them enough to get hold of it with the tip of needle-nosed pliers. The peg broke off in several pieces. Some I could remove by snapping them off and others had to be pushed in behind the refrigerator wall because there was no way to get hold of then. Once that was done, the new peg popped easily into place.
Parts Used:
-
Elaine from Canon City, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken bin
-
Tuelinh from Atlantic City, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Cam On Bottom Of Right Door
1-Remove upper plate with phillips screw driver (6) screws 2- remove upper hinge plate with ratchet and socket (2) bolts 3- lift door off bottom cam, lay door flat on floor. 4- Remove broken cam on lower part of door, just pull out. 5- Install new cam in bottom of door 6- raise door up, set on cam, reinstall top bolts and screws 7- p. S. Make sure you trace top hinge location with a pencil before removal, so installation has proper location.
Parts Used:
-
David from Laquinta, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken freezer door bin
-
Stacey from Jonesboro, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Child Used Door Shelf As Step Stool
Easily installed the two new shelf bins. I ordered the wrong ones to begin with and the return process was absolutely fantastic. They were very helpful.
Parts Used:
-
Tina from Pensacola, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer and track broken
I took out the drawer, then the whole shelf. I unscrewed the track that was broken and screwed in the new one. I then, put the shelf back in the fridge and put in the new drawer. All works awesome!!!
Thanks PartSelect for getting me the parts I needed so fast!
Thanks PartSelect for getting me the parts I needed so fast!
Parts Used:
-
Dawn from lake in the hills, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door bins.
The repair was not more than snapping in two shelves...but the PartSelect service was another matter. It was awesome!! I ordered the parts on a Friday morning...and they were at the door by 2:00pm Saturday!!! Even for Ok City to Kansaas City...that was blistering speed! Thank-you.
Parts Used:
-
Amber from Olathe, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelves
washed the shelves. Dried the shelves, and popped the shelves back into the freezer and refrigerator doors.Budda Bing
Parts Used:
-
David from Youngstown, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water valve went out
Very easy repair, instruction were clear and easy to follow
Parts Used:
-
Alan from Victor, ID
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door bins cracked and needed to be replaced.
Very easy. Just removed the old bins and slid the new ones into place. Very easy.
Parts Used:
-
Marie from Rutland, VT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker Quit Making Ice
I watched the video and did the same thing on mine and now it is working fine
Parts Used:
-
ROBERT from JACKSONVILLE, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker did not work
-
shelton from virginia beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting the light socket to snap back in properly
-
Robert from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter old needed to be replaced
-
Robert from Cleveland, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf support
-
Jerome from Hendersonville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!