Models > WRS23W0AWE

WRS23W0AWE Westinghouse Refrigerator - Overview

Get Parts and Repair Help for WRS23W0AWE

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRS23W0AWE, or you can search by name or part description. You can also find your part by where it is located on the WRS23W0AWE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRS23W0AWE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.75

Crisper Cover Support - Front

This part can be used for the front support. Sold individually and mounts to the inside cabinet wall.

Order within the next 11 mins and your part ships today!
$3.84

Crisper Support - Rear

This part mounts on the inside of the wall. Sold individually.

Order within the next 11 mins and your part ships today!
$6.93

Hinge Bearing

Sold individually. Also known as a short door closing cam.

Order within the next 11 mins and your part ships today!
$11.50

Defrost Thermostat Kit

This kit includes the clip, leads and heat shrink.

Order within the next 11 mins and your part ships today!
$29.64

Door Shelf Bin

Sold individually. Sometimes referred to as the 2-liter bin.

Order within the next 11 mins and your part ships today!
$24.84

Door Closing Cam

Sold individually. This cam is located at the bottom of the fridge/freezer door.

Order within the next 11 mins and your part ships today!
$25.00

Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Order within the next 11 mins and your part ships today!
$25.55

Water Dispenser Actuator

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

Order within the next 11 mins and your part ships today!
$35.82

Door Shelf Bin

Also known as gallon door bin.

Order within the next 11 mins and your part ships today!
$41.61

Evaporator Fan Motor Kit - 120V 60Hz

This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Order within the next 11 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Support studs were broken

  • Customer: Peter from Amherst NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 172 of 177 people found this instruction helpful
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. read more

Running but not cooling off and frost in the back of the freezer

  • Customer: Leo from Bentonville AR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 146 of 183 people found this instruction helpful
Unplugged the refrigerator. Removed the 4 hex head screws on the lower back panel at the back of the freezer. Used a blow dryer to defrost the pipes and area surrounding the thermostat. Unplug the connection from the back of the freezer, unplug the 2 wires, one that goes to the heater, one that comes from power. Unclip the thermostat from the pipe and no... read more

"Paddle" on ice actuator broke off.

  • Customer: Ryan from Elk Grove CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 60 of 67 people found this instruction helpful
Slide off drip tray at bottom of ice/water compartment.

Remove the 3 screws along bottom edge of face plate. Slide face plate upwards slightly to disengage tabs holding top of face plate to fridge door. Pull face plate slightly away from fridge, reach behind plate, and disconnect wiring harness. Set face plate aside.

Remove 3 screw... read more