Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WRS23W0AW5

WRS23W0AW5 Westinghouse Refrigerator - Overview

Get Parts and Repair Help for WRS23W0AW5

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRS23W0AW5, or you can search by name or part description. You can also find your part by where it is located on the WRS23W0AW5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRS23W0AW5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Crisper Cover Support - Front

This part can be used for the front support. Sold individually and mounts to the inside cabinet wall.


Crisper Support - Rear

This part mounts on the inside of the wall. Sold individually.


Evaporator Fan Motor Kit - 120V 60Hz

This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and cir...


Hinge Bearing

Sold individually. Also known as a short door closing cam.


Defrost Thermostat Kit

This kit includes the clip, leads and heat shrink.


Door Shelf Bin

Sold individually. Sometimes referred to as the 2-liter bin.


Replacement Ice Maker

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that...


Ice Maker with Cover - 8 Cube


Dispenser Crusher Housing

This part may look different or be a different color than the original, but will fit and function the same as the original part.


Door Shelf Bin

Also known as gallon door bin.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Support studs were broken

  • Customer: Peter from Amherst, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 243 of 254 people found this instruction helpful
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. read more

Running but not cooling off and frost in the back of the freezer

  • Customer: Leo from Bentonville, AR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 216 of 261 people found this instruction helpful
Unplugged the refrigerator. Removed the 4 hex head screws on the lower back panel at the back of the freezer. Used a blow dryer to defrost the pipes and area surrounding the thermostat. Unplug the connection from the back of the freezer, unplug the 2 wires, one that goes to the heater, one that comes from power. Unclip the thermostat from the pipe and no... read more

Broken ice maker

  • Customer: Juan from Miami, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 154 of 209 people found this instruction helpful
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice. read more