WRS23MW3AWS Crosley Refrigerator - Instructions

thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.

Installed them within 5 minutes

I turned off the water, removed the cardboard cover from the back of the refrigerator; removed the 2 screws holding the water valve in place; unscrewed the plastic tubing from the valve; unplugged the wires to each solenoid (3); the old valve had threaded connections for the plastic water lines, the new valve didn't; I had to cut the ferrel off of the plastic lines so I could insert them into the new valve and then press the connector into the valve (I didn't anticipate something like this, but it worked fine); I reconnected the wiring and screwed the valve back into place. The ice maker started making ice and the water stopped dripping from the dispenser. The best $65 I've ever spent.

Replacing the shelf was a "no-brainer." I just wanted to say thank you for PartSelect for the more than excellent service.

It was simple as snapping the new part in place.

It was easy I watched the video on how to replace it that Parts Select had on line. It was easy, it took me approximately 20 minutes to complete. Thanks for having the video, everything went very smoothe.

I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises

Firstly I watch the video from the web site as how to install the part, and it was a breeze from there. The video was just super!! It took any doubt away how to access the broke part, how to remove it and how to replace it. The arrived in two days and was installed the same day.

First thing I watched the video attcahed to the e-mail I received, and was happy to get that I am legely blind (vision 20/200) and must have someond read the instructions to me . with your video aqnd feeling for screw heads we did the job in arround one hour I got all screws out and new part in without any thing left over. James H. Meade

The unit came with a wireing harnes.The only thing that was not the same was the ADC unit plug.thats why you replace it.take the cover off and replace one wire at a time, plug the new ADC in and replace covers.I should have gotten the fan and the thermostat at the same time.The fan was my problem

Pull out the old clips,that were crack.The new ones are hanging off.I don'nt know if i should put some kind of glue,or something.To help it stick on.

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I diagnosed the problem by checking the water flow at the supply valve and hose by disconnecting the hose from the back of the fridge. Found the pressure to be adequate. I then reconnected the supply hose and removed the cardboard backing from the fridge and removed the nuts holding the water inlet valve to the chassis. I loosened the first hose that runs from the bottom of the valve and had my wife activate the valve by pushing the water switch on the front of the fridge. Water basically sputtered out of the valve and I decided that was where the problem was. I ordered the valve from partselect. When it arrived I thought it was the wrong part because it had push-fittings whereas my original valve was all thumb screws. I took a chance and one by one used a utility knife to cut the hose free of the old valve as close to the nut as possible. Connecting them to the new valve was a piece of cake! Just make sure the hose bottoms out when you push it in. I turned the water back on, no leaks! Plugged the fridge in and pushed it back to the wall. After a bit of air bled out I had a strong flow of wateragain like new! The next day the ice cubes were solid again! We use the filtered water so many times a day and had been so frustrated with the slow water flow we had considered donating the fridge and buying a new one; thanks to this easy fix we expect keep it for years to come!

I did it just like the video it was that easy! love this web site amazing!

I thought this was going to be such a chore to find this part, but it wasn't. I went to partselect.com, found the piece I needed, paid for it and was done in 10 minutes. Partselect.com made searching for the piece I needed incredibly easy to find and order. I received the part on time an put the bin in place in five seconds. I will always go back to partselect.com to find my products.