WRS23MW3AWG Westinghouse Refrigerator - Instructions

While the kids were getting ready for school in the morning they took a small break to help me. They balanced the door while I removed the old broken portions with needle nose pliers which took more time than everything else. I had the 1 philip screw and two hex screws removed and replaced in less than 15 minutes. The video was great because it confirmed what I already assumed.

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I did it just like the video it was that easy! love this web site amazing!

The repair was extremely simple. First i unplugged the fridge and removed everything from the door. I unscrewed the plastic cap on top of the fridge door hinge to expose the hinge. Then i unbolted the hinge it helps to have someonehold the door so it doesn't fall. After laying the door down I removed the rest of the broken hinge bearing inserted the new one and reinstlled the door making sure it was lined up evenly from top to bottom to the freezer door. The only thing that was annoying was i had to remove the metal plate at the bottom of the door to get to the broke off hinge bearing and those srews were square head screws not phillips head like the one on top of the door.

I thought this was going to be such a chore to find this part, but it wasn't. I went to partselect.com, found the piece I needed, paid for it and was done in 10 minutes. Partselect.com made searching for the piece I needed incredibly easy to find and order. I received the part on time an put the bin in place in five seconds. I will always go back to partselect.com to find my products.

Removed upper and lower screw covers. Removed 4 screws , Removed broken handle. Installed new handle with th 4 screws provided. Replaced screw covers. Done!

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

I watched a "how to repair" video on PartSelect. Everything went just as described until I realized that the actuator I was replacing had two tiny lights with wires attached. Perhaps I ordered the wrong part but it looked like the part I ordered would still fit but just not have the lights. I really didn't think it was necessary to have lights so I used scissors and clipped the wires so I could remove the old actuator. Then I continued to follow the directions in the video and now I have a perfectly functioning water dispenser. My husband was so proud of me! One additional tip- I found it was helpful to use a flashlight so I could see really well.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

Had a little trouble getting old pin out of support bracket finally used screwdriver and broke plastic so I could get to the pin and used needle nose pliers to remove hanger then came right out putting new one in was a snap slid in tapped pin in and installed new crisper bracket took about 15to 20 minutes to complete.Contribute difficulty in removing pin to age of refrigerator had been in place for at least 5 years maybe longer overall experience not bad.I am 75 would probably been easier for a younger man more flexible.

I watched the step by step video. I t was a breeze. Thanks for the fast service and number 1 video to show me how to install

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

Had one other person, so putting the door back was easier. Repair went as told. Could do it myself.

Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.