WRS23MW3AQA Westinghouse Refrigerator - Instructions

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

A friend of our family gave us a nice refrigerator; 2 doors, has ice maker. some parts were missing but through the Parts Select I've been able to purchase online any part needed. Very easy to install and I didn't have any problems with the parts delivered. Fast service and I always get the right part without any delays of returning them. I strongly recommend Parts Select for any person who need to purchase refrigerators parts online.

Pan cover/Shelf glass gotten broken while out cleaning. Takes less than a minute to remove glass and re-insert (unless you break glass insert)

Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com

pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.

Called repair person, 80.00 to come look at it. Deceided to see if I could find part on my own. Surfed the net found this website, ordered the part for 5.00, total 13.00 including shipping. waited a few days, received part in mail, lifted refrigerator door off hinge, inserted the part. Works like new. 80.00 plus repair, cost me 13.00. Amazing

First off make sure you have a good quality Phillips screw driver. When the blade is worn out you can disassemble the ice maker with out removing the front. But to reassemble the front cover must be removed. Do yourself a favor and buy the drum and nut also. I am a mechanic by trade so the tools and repair was really easy. Be careful of the ice crusher BLADES they are very sharp. If your not mechanically inclined take pictures before disassembly, that will help you greatly. Hope this helps someone. Thanks Rory

I looked up the model number here& found the parts list. They were very detailed, making identification of the proper part easy. I then watched the repair video which showed just how easy this repair was to complete. Once the part arrived, I removed the hinge cover screw, removed the two hinge bolts and lifted the door off the bottom hinge. It took the most amount of time to remove the broken hinge bearing. The new one popped right into place. I reversed the process and was quickly finished.

This was a simple fix: 1. Take out water drip pan in bottom of ice maker. 2. Take out the three screws. 3. Pull cover upwards, no need to take out cable, have somone hold it while continuing work. 4. Take out three remaining screws from ice/water dispenser. Pull forward to show base of ice lever. 5. Take out screws that hold the little steel plates where lever shaft sits in place (2). 6. Pull out broken lever and replace with new one. 6. Put all poeces back in reverse order.

Crusher housing had broken so I ordered the part and replaced it. I have since put it back together twice. When I first installed it it crushed the ice no problem. From that point on it seems to lock up and won't crush the ice, cube ice works but the blades seems to hang up after the first use. I can turn the cog by hand but I have to turn it backwards a few times before it turns freely, however it still won't crush the ice. I took it apart and put it back together again. Same thing happened after the first time I tried it. Can you help me. The old crusher broke into. Could something else be locking up?Thanks for the help

I first ordered the part from a local appliance/repair store in my area. The part was way over priced and they had ordered the wrong part when I went to pick it up. I had provided a picture of the part I need to them / it didn't help. I searched the internet for the needed part and found PartSelect. I found the exact part "I thought I needed" and also saw an additional hinge part that fit in the bottom of the door. I purchased both (figured if one was worn out the other would be soon). Turned out that it was "the additional part" that I needed. I would recommend that you suggest both parts when doing this particular repair. I also liked the fact that you provided pictures of the parts in question . . . recognized it immediately from your site. The repair video provided on the PartSelect sight was very helpful. The repair was a breeze for an old woman. I was very happy with the person who took my order (she was very nice and very professional); and the speed in which I received the part. PartSelect is now saved in my favorites for future reference. I recommend them highly. Thanks for your help. Beverly Brunner

Took every thing out of the door, removed 2 screws (plus cover screw), laid the door down, replaced the parts, put the door back on. When the refrigerated stuff was back in the door shelves, I was done.

The broken bin was removed. It lifts out. And the new bin slipped into place!!

As per video. No problem.

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.