WRS23MF5AST Crosley Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Cam On Bottom Of Right Door
1-Remove upper plate with phillips screw driver (6) screws 2- remove upper hinge plate with ratchet and socket (2) bolts 3- lift door off bottom cam, lay door flat on floor. 4- Remove broken cam on lower part of door, just pull out. 5- Install new cam in bottom of door 6- raise door up, set on cam, reinstall top bolts and screws 7- p. S. Make sure you trace top hinge location with a pencil before removal, so installation has proper location.
Parts Used:
-
David from Laquinta, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer and track broken
I took out the drawer, then the whole shelf. I unscrewed the track that was broken and screwed in the new one. I then, put the shelf back in the fridge and put in the new drawer. All works awesome!!!
Thanks PartSelect for getting me the parts I needed so fast!
Thanks PartSelect for getting me the parts I needed so fast!
Parts Used:
-
Dawn from lake in the hills, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I just simply inserted the bin
-
william from chicago, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Red light came on, needed a new one
Removed the old, installed the new one and finally figure out we had to press the reset button.
Parts Used:
-
Joseph from Virginia Beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice
Simple, I had a repair man come over and diagnose the problem. After confirming, I ordered the part and replaced it. Need to make sure you get the ice build up out of the fitting tnat goes from the back of the fridge connection at the top and the filler tube inside the unit, mine was iced over. Repair man wanted to charge me $250.00... with his service call and buying the part, it cost $120
Parts Used:
-
Michael from Delray Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Daughter has tried to close door while storage item was at bottom of refrigerator...consequence door bin broke lip that secures it to door. i ordered two replacement doors. i cleaned up the door bin applied gorilla glue and prayed. the new parts came in after glue dried...new part are in box and do
-
Betty from Bristol, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Time to replace filter.
I took out the old filter and put in the new filter. I ran some water through it and it was done.
Parts Used:
-
Kay from Port Hueneme, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door plate had broken
I took the top door plate off lifted up the door and uncrewed the broken part and installed the new one. Lifted the door and placed post into bushing. Viola the door worked better than when it was new
Parts Used:
-
James from Sun City, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting the light socket to snap back in properly
-
Robert from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter due for replacement
-
Dennis from Crossville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter old needed to be replaced
-
Robert from Cleveland, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf support
-
Jerome from Hendersonville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the crisper support broke
I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.
Parts Used:
-
Bambie from Canoga Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter needed replacing
Loved the website. Easily found the part I needed. Filter received in two business days. Wow, really fast service. Replacing water filter was a piece of cake. Pulled out old filter, removed caps from new one and slid it into place. Will certainly look to this company for parts in the future.
Parts Used:
-
MaryLou from Woodburn, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker wouldn't fill
I had a repair man do the work.
That's always best.There was one day delivery on the part and the price was great. Thanks
That's always best.There was one day delivery on the part and the price was great. Thanks
Parts Used:
-
Robert A. from St. Augustine, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable), Wrench set
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!