WRS23MF5AS9 Westinghouse Refrigerator - Instructions

it was a simple fix, all i had to do was remove 3 small bolts from top of door, set door aside remove 1 screw that holds door cam in place, install new door cam.hole job took about 15 minute's.

Couldn't have been an easier. Removed the screw/nuts from the top of the fridge door that held the door in place and removed the door. Unscrewed the holder at the bottom, replaced both parts and put the door back together. It took me longer to get everything out of the fridge door than to replace the parts. EASY AS COULD BE!!!

I basically took the two shelves and in stalled them.

I followed the website instructions, step by step. The web instructions were great. Easy to understand. Complete. Do yourself a favor.... just follow the instructions off the web! Great service! I am so happy to have found Part Select and will recommend to my friends.

Ordered the part from PartSelect. Estimated time for slow delivery seven days. I got it in three. Removed the cover from the water and ice maker dispenser arena held on by three screes. I had to use an easy out on one rusted scree. Disconnected the wiring to the switches and lat the Circuit Board come forward by removing three small screws. Using tweezers to catch the screws, I removed two small screws holding the broken actuator and put the new one in its place making sure the spring was properly located and the ice maker swivel was under the hold-down strip along with the new actuator. I reassembled the door cover and got a drink of cold water. By the way, always unplug the refrigerator because that area is hot. Dr Robert E McGinnis author of In Search Of Paradise and many other fine books found on Amazon.

Simply removed two screws from top hinge and lifted door off bottom hinge. Next leaned door over and removed broken portion of bearing. Finally reinstalled door and works like a charm. Thanks too this site painless repair. Oh ya part is a perfect fit.


Thanks Clay


P.S. Would recommend to a friend. Note shipping WOW. Please consider using US Mail. Shipping more than part. OUCH.

Watched the video and read some comments and from that it was easy

I needed one with the adapter. I installed it and there was ice in the tray the next morning...no problem

Drove pins all the way thru supports & then pryed support off. Tapped new supports in place. Watch the vidio on installing new supports. I probably wouldn't have been able to get the supports off without the trick I learned to just knock them on thru. Took all of 5 minutes to replace 4 supports.

Replacement took about 10 seconds, just put it onto the holding brackets, pressed down and presto...DONE!

Purchased 2 parts on line, easy replacement, one man job, 4 nuts to remove and replace. 20 minutes

I watched the video and did the same thing on mine and now it is working fine

put in a new one

It snapped in place.

ordered the part, watched the video....it was a snap