Models > WPXH214A0WW > Instructions

WPXH214A0WW General Electric Washer - Instructions

All installation instructions for WPXH214A0WW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WPXH214A0WW
16-18 of 18
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Getting to the area of /for installing was a nightmare I removed the front lower panel only, dur to ther fact that the washer was in a confined area and could not move it out or around. I took your suggestion and used 2x34 short pieces to raise up the front end/side to make it a bit easier, I though

  • Customer: Marcia from Durango CO
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 2 people found this instruction helpful
actual exchange of shocks went well. Perfect fits and easy to install.

Did not drain or spin

  • Customer: giuseppe from sarasota FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Removed old pump and re installed a new one,took no more than 20 minutes,the hardest part was re connecting the trap- hose and the drai n,very easy .Just unscrew the two screws holding the pump and replace it with the new

Broken door latch on front loader machine

  • Customer: Tammy from Somersworth NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part was exactly what we needed and came sooner than we expected. It was easy to fix and we avoided hiring a repair man.
All Instructions for the WPXH214A0WW
16-18 of 18