Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WOC54EC7AB00

WOC54EC7AB00 Whirlpool Wall Oven - Overview

Get Parts and Repair Help for WOC54EC7AB00

If you know the wall oven repair part you need, you can browse the list of all parts on the WOC54EC7AB00, or you can search by name or part description. You can also find your part by where it is located on the WOC54EC7AB00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
$19.77

Terminal Block

This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.

Order within the next 1 hr and 29 mins and your part ships today!
$6.12

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

Order within the next 1 hr and 29 mins and your part ships today!
$4.79

Screw

Sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
$2.94

Screw

Sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

Order within the next 1 hr and 29 mins and your part ships today!
$20.62

Light Bulb

Order within the next 1 hr and 29 mins and your part ships today!
$3.02

Screw (2)

This screw is sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
$15.96

Line Fuse

Order within the next 1 hr and 29 mins and your part ships today!
$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 71 of 153 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 22 of 31 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

oven temp wrong

  • Customer: Alan from Wallkill, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 7 of 8 people found this instruction helpful
Remove the oven door. Remove 3 self tappers on rear wall of oven to take off a round access panel. Pull out a pre-cut rectangle of insulation. Next I removed the 2 screws holding the sensor in place. Pulling the sensor out a bit told me I was "touching" the correct wires in the SMALL rectangular opening. The wires are not visable and 2 hands do not fit in t... read more