Models > WOC54EC0AW00

WOC54EC0AW00 Whirlpool Oven - Overview

Get Parts and Repair Help for WOC54EC0AW00

If you know the oven repair part you need, you can browse the list of all parts on the WOC54EC0AW00, or you can search by name or part description. You can also find your part by where it is located on the WOC54EC0AW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$5.05

Touch-Up Paint - White

18ml

$19.68

Element Mounting Bracket

This part is used to hold up the heating element.

$20.60

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$5.44

RING-TURN

This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

$2.70

SCREW

Sold individually.

$7.54

Spray Paint - 12 oz. - White

$18.36

Coupler

This part connects the motor to the glass tray to rotate the tray.

$6.77

Touch-up Paint - Black

16ml

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 19 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 38 of 91 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Ceramic part holding up the heating element fell and broke.

  • Customer: Jerry from Woodinville WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 14 people found this instruction helpful
Easiest repair I've made in years. Didn't even need a tool.
One end slides into a hole in the ceiling of the microwave/convection over, move the heating element into place and turn the mounting bracket and you're done. read more