Models > WMH32517AT2

WMH32517AT2 Whirlpool Microwave - Overview

Get Parts and Repair Help for WMH32517AT2

If you know the microwave repair part you need, you can browse the list of all parts on the WMH32517AT2, or you can search by name or part description. You can also find your part by where it is located on the WMH32517AT2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for WMH32517AT2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.46

Charcoal Filter

This filter helps to eliminate odors while cooking.

$3.46

Light Bulb - 40W

Sold Individually.

$3.63

Light Bulb - 40W

$8.13

Grease Filter

$8.39

RING-TURN

$8.39

Mounting Bracket

Bracket only.

$13.18

TRAY-COOK

$2.70

Top Mounting Screw

This screw is sold individually.

$3.63

SUPPORT

$35.54

Damper Assembly

This assembly includes the damper door and frame.

Common Symptoms of the WMH32517AT2 [Viewing 1 of 11]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light bult needed to be replaced

  • Customer: Deborah from Millersville MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 32 of 41 people found this instruction helpful
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we ... read more

Bulb "burnt out"

  • Customer: Joseph from Pembroke MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 25 people found this instruction helpful
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb. read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more