Models > WMH1164XWS5

WMH1164XWS5 Whirlpool Microwave - Overview

Get Parts and Repair Help for WMH1164XWS5

If you know the microwave repair part you need, you can browse the list of all parts on the WMH1164XWS5, or you can search by name or part description. You can also find your part by where it is located on the WMH1164XWS5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for WMH1164XWS5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.46

Charcoal Filter

This filter helps to eliminate odors while cooking.

$3.46

Light Bulb - 40W

Sold Individually.

$3.64

Light Bulb - 40W

$8.71

Grease Filter

$8.69

RING-TURN

$8.69

Mounting Bracket

Bracket only.

$2.70

Top Mounting Screw

This screw is sold individually.

$13.18

TRAY-COOK

$16.94

DIODE

$35.54

Damper Assembly

This assembly includes the damper door and frame.

Common Symptoms of the WMH1164XWS5 [Viewing 1 of 87]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light bult needed to be replaced

  • Customer: Deborah from Millersville MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 25 of 32 people found this instruction helpful
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we ... read more

Bulb "burnt out"

  • Customer: Joseph from Pembroke MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 14 of 19 people found this instruction helpful
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb. read more

Microwave made very loud noise while on. No heat.

  • Customer: Sleiman from Miami FL
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 12 of 13 people found this instruction helpful
Unless you have a very comfortable background with electronics and electricity, I don't necessarily recommend taking apart a microwave. If you are very handy and are going to be VERY cautious to follow the rules of discharging caps and testing voltages before moving forward, then go for it. That said, I took the microwave off and apart. Not knowing where ... read more