Models > WMH1163XVD5

WMH1163XVD5 Whirlpool Microwave - Overview

Get Parts and Repair Help for WMH1163XVD5

If you know the microwave repair part you need, you can browse the list of all parts on the WMH1163XVD5, or you can search by name or part description. You can also find your part by where it is located on the WMH1163XVD5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for WMH1163XVD5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.46

Charcoal Filter

This filter helps to eliminate odors while cooking.

$3.86

Light Bulb - 40W

Sold Individually.

$3.91

Light Bulb - 40W

$11.57

Grease Filter

$8.41

RING-TURN

$8.41

Mounting Bracket

Bracket only.

$14.66

TRAY-COOK

$18.04

DIODE

$2.70

Top Mounting Screw

This screw is sold individually.

$46.60

Vent Grille - White

Grille only.

Common Symptoms of the WMH1163XVD5 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light bult needed to be replaced

  • Customer: Deborah from Millersville MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 27 people found this instruction helpful
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we ... read more

Bulb "burnt out"

  • Customer: Joseph from Pembroke MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb. read more

Humming sound, not heating.

  • Customer: Fausto from Miramar FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 11 of 14 people found this instruction helpful
I turn off the income electricity by shutting down the corresponding circuit breaker. Then, I removed the control panel from the microwave which gave me access to the capacitor and adjacent diode. After that i unscrewed the defective diode and replaced it with the new one and BINGO! read more