Models > WM2720W

WM2720W Jenn-Air Oven - Overview

Get Parts and Repair Help for WM2720W

If you know the oven repair part you need, you can browse the list of all parts on the WM2720W, or you can search by name or part description. You can also find your part by where it is located on the WM2720W by selecting a section below. We’ve also included any installation videos we have for WM2720W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

$2.70

Screw

This screw is sold individually.

$18.07

2 Piece Broiler Pan

$38.48

Oven Rack

Sold individually.

$3.84

SCREW

$25.52

Broiler Pan

$9.95

Clock Knob

Sold individually. This knob will accept a D-shaped shaft.

$4.46

Lock Indicator Light

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lightening blew out the digital clock works and therefore we couldn't use the self clean oven.

  • Customer: Peter from Savannah GA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 7 of 8 people found this instruction helpful
turned off electricity at the circuit breaker.Pulled stove out and looked at the way the control center was attached to the rest of the stove. Removed the knobs and 4 screws and the complete panel could be removed (or pulled out from the oven-wires are still all attached). Then checked with an electric meter to insure the power was off to all the wires. T... read more

missing screws for oven door

  • Customer: donna from baltimore MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 8 people found this instruction helpful
After searching on the internet for a very long time, we were almost ready to order the screws "blind" (no picture) from Sears for almost $10.oo per screw. Then I stumbled onto this website and found exactly what I was looking for, with a detailed description AND a picture!! Not to mention a price that was two thirds less than Sears..for TWO screws. Now th... read more

clock not working--blank

  • Customer: JEFF from ORIENTAL NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
removed 4 screws holding entire face plate. Rolled face plate up on top of stove and left all wires attached (many). removed 4 screws adjacent to clock assy. Removed control knob just on either side of clock assy and removed control screws (2 on each). removed wires attached to clock assy and transferred new assy. Re-assembled and set clock time. read more