Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WM2455HG > Parts

WM2455HG (APGEEUS) LG Washer - Parts

All parts for the LG Washer WM2455HG

Below is a list of all parts for the LG Washer WM2455HG - Residential WASHER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WM2455HG
1-14 of 107
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$57.69

Drain Pump and Motor Assembly

The drain pump and motor assembly may also be known as the washer drain pump, and is a part for your washer. The function of this assembly is to help expel water from the washing m...

$24.26

Water Inlet Valve - Hot

The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test your valve, unplug the washer when the symptom occurs. If the washer continues to fill, then your inlet valve is defective. This part is approximately 3 inches long x 3 inches wide.

$16.15

Gasket

If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider...

$23.64

Tub-to-Pump Drain Hose

This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to the drain pump so the used water can properly empty from the tub. This part is made of rubber, is black in color and measures 13 inches long. Be sure to drain the excess water from the washer before completing this repair. This is an authentic OEM part that is sourced directly from the manufacturer.

$14.24

Gasket

This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two ...

$4.40

Locking Pin

This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made entirely of plastic. This part is used to hold the shock absorber on the washing machine. There is a pin used at the bottom and top of the shock absorber. This model is sold individually. If your washing machine is experiencing an above-average amount of shaking and moving this part may be the reason.

$133.64

Door Gasket

Also known as a door boot seal or bellow and comes with a drain hole.

$24.26

Shock Absorber Kit

This kit includes 1 shock absorber and 2 pins.

$14.24

Box Assembly,Detergent

$31.26

Sensor Assembly

$14.24

Pump Casing

This part connects to the drain pump and motor.

$16.15

Pump Filter

$24.26

Washer Hose with Bellows

$4.40

Cap,Drain Hose

All Parts for the WM2455HG
1-14 of 107