Models > WM2032HS

WM2032HS LG Washer - Overview

Get Parts and Repair Help for WM2032HS

If you know the washer repair part you need, you can browse the list of all parts on the WM2032HS, or you can search by name or part description. You can also find your part by where it is located on the WM2032HS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WM2032HS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.73

Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. Note: Pump casing is not included.

Order within the next 1 hr and 36 mins and your part ships today!
$17.52

Water Inlet Valve - Hot

Order within the next 1 hr and 36 mins and your part ships today!
$10.52

Tub-to-Pump Drain Hose with Bellows

This hose has bellows to allow for flexibility during the wash and spin cycles.

Order within the next 1 hr and 36 mins and your part ships today!
$34.68

Tub Bearing

Order within the next 1 hr and 36 mins and your part ships today!
$22.89

Tub Bearing

Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$8.18

Gasket

Order within the next 1 hr and 36 mins and your part ships today!
$6.34

Gasket

Order within the next 1 hr and 36 mins and your part ships today!
$1.96

Locking Pin

The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$64.72

Circulation Pump Motor - 120V 60Hz

On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water.

Order within the next 1 hr and 36 mins and your part ships today!
$22.58

Sensor Assembly

Order within the next 1 hr and 36 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Washing maching wouldn't drain

  • Customer: Jorge from Apple Valley CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 235 of 297 people found this instruction helpful
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just... read more

Worn bearings

  • Customer: Anthony from Crystal Lake IL
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 19 of 24 people found this instruction helpful
To replace the bearings a complete disassembly of the washer was required. After pulling the tube assembly from the cabinet and separating the tube enclosure halves and removing the rotor and stator, since the washer uses direct drive, a gear puller was required to push the drive shaft through the old bearings since they didn’t separate easily as seen in sev... read more

Leaking Hot Water Intake Valve

  • Customer: Thomas from Commack NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I received the part needed within a few days from ordering. I immediately removed the leaking part with the new part. It was a very simple install, and my washer is now leak free. If you think you cannot do these simple changes, think again, it's much easier then you may think. Remove the top cover of your washer machine by taking off the two screws in the b... read more