Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
If you know the range repair part you need, you can browse the list of all parts on the WGF351ESA, or you can search by name or part description. You can also find your part by where it is located on the WGF351ESA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WGF351ESA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.
The temperature sensor detects the temperature within the oven cavity. If there is a limited amount of heat, it is not heating evenly, or the oven will not start, this might indica...
This kit is used to convert your appliance to liquid propane.
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace wit...
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of the light bulb while the lens is off. This part is made of glass. The lens is a genuine Frigidaire part, sourced directly from the manufacturer, and is sold individually.
This is a bake igniter manufactured for an oven, stove, or range burner. It ignites the gas to light the oven burner to bake your food items. If your oven will not heat properly, y...
This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If your glide is damaged or missing, replacing it could solve any difficulty using the drawer. First, remove the storage drawer and locate the rear glide on the side. Next, remove the glide by taking out the screws. Replace new glide by placing tabs into the cut-out. If you are replacing both rear drawer glides, then repeat the same on the other side. Refer to the diagram provided by the manufacturer for further installation instructions and guidance.
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, ...
The front storage drawer glide on your range is mounted on the side of the cabinet. The purpose of the drawer glide is to support the storage drawer from the front. If your front storage drawer glide is damaged or missing, or your storage drawer does not close properly, you should consider replacing the drawer glide. This product is sold individually. This part is approximately 2 inches in length, and 1 inch in width. The front drawer glide is made of white plastic. Many of our customers have rated this repair as easy. The storage drawer also uses a rear drawer glide, which you can find by searching part 977753.
Fixed by these parts
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.