Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WGF350ESA > Parts

WGF350ESA Westinghouse Range - Parts

All parts for the Westinghouse Range WGF350ESA

Below is a list of all parts for the Westinghouse Range WGF350ESA - White. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WGF350ESA
1-14 of 120
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$27.48

Oven Temperature Sensor

The temperature sensor detects the temperature within the oven cavity. If there is a limited amount of heat, it is not heating evenly, or the oven will not start, this might indica...

$27.54

Natural Gas to Liquid Propane Conversion Kit

This kit is used to convert your appliance to liquid propane.

$107.28

Bake Igniter

This is a bake igniter manufactured for an oven, stove, or range burner. It ignites the gas to light the oven burner to bake your food items. If your oven will not heat properly, y...

$8.18

Anti-Tip Kit

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in the back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.

$11.33

Medium Burner - 9.5K

$8.68

Rear Drawer Glide

This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If your glide is damaged or missing, replacing it could solve any difficulty using the drawer. First, remove the storage drawer and locate the rear glide on the side. Next, remove the glide by taking out the screws. Replace new glide by placing tabs into the cut-out. If you are replacing both rear drawer glides, then repeat the same on the other side. Refer to the diagram provided by the manufacturer for further installation instructions and guidance.

$13.49

Medium Burner Cap - Black - 9.5k

$52.93

Metal Rack

$8.68

Front Drawer Glide

The front storage drawer glide on your range is mounted on the side of the cabinet. The purpose of the drawer glide is to support the storage drawer from the front. If your front s...

$41.18

Front Burner Igniter/Orifice Assembly

$34.92

Burner Knob

Sold Individually. This knob accepts a D-shaped shaft.

$31.57

Door Handle

Screws are not included.

$5.02

Steel Washer

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter ...

$55.67

Oven Door Cap - White

This part goes over the top of the oven door glass. The door handle also attaches to the door cap.

All Parts for the WGF350ESA
1-14 of 120