Models > WFW97HEXL1

WFW97HEXL1 Whirlpool Washer - Overview

Get Parts and Repair Help for WFW97HEXL1

If you know the washer repair part you need, you can browse the list of all parts on the WFW97HEXL1, or you can search by name or part description. You can also find your part by where it is located on the WFW97HEXL1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WFW97HEXL1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Foot, Front - Single

Sold Individually.

$2.70

Hose Clamp

$35.87

Flowmeter

This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.

$5.05

Touch-Up Paint - White

18ml

$22.17

HOSE

Attaches to water pump assembly.

$2.70

Water Inlet Hose Washer

Sold Individually. Order quantity needed.

$2.70

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

$9.56

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$7.54

Spray Paint - 12 oz. - White

$49.42

Dispenser Actuator Switch

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F/H error code.

  • Customer: Jeff from Naples FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 36 of 41 people found this instruction helpful
Removed the top (3-4 screws at back). Flowmeter has 2 hoses with hose clamps. Removed with plyers. Simple electrical connector removed.

Reversed procedure. Running perfect now.

How did I know it was the flow-meter? Read the service manual as possible causes to narrow it down. Disassembled old flowmeter and cleaned. That fixed for awh... read more

Washer leaking

  • Customer: Alexander from Miami FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 21 of 24 people found this instruction helpful
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.

Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.

The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machine requires brute fo... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 19 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more