This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is imp...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This hose attaches to water pump assembly.
NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling ...
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This part regulates the temperature of the water in the tub. The sensor is located in the heating element.
$37.33
In Stock
Questions And Answers for WFW94HEAW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bobby
January 3, 2020
The fabric softener sit in tray after cycle its like it's not getting any water to flush out the fabric softener
For model number WFW94HEAW0
Hello Bobby, thank you for your question. The first thing we would recommend you doing is removing the dispenser drawer and cleaning it well. Clean the hoses to and from the dispenser as well. Alot of times the fabric softener will cause a buildup on the tubes that will cause water to not come into the dispenser drawer to rise the softener out. If that doesn't fix the issue the problem could be the water valve or the electronic board. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
THOMAS
April 14, 2023
Getting a FO8 error code. Shuts down on Hot water cycle.
For model number WFW94HEAW0
Hi Thomas, thank you for your inquiry. F08 indicates that the heater is an open circuit. You may need to check the heater wires for dislodged or burned wires and check the heater, part number PS11754622, for continuity. If the heater is faulty, you may need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Bobby
December 26, 2019
Fabric softener sets in tray want dispense
For model number WFW94HEAW0
Hello Bobby, thank you for your inquiry. For your model WFW94HEAW0, we recommend replacing the Dispenser Drawer Assembly. This is part number PS11753798. I hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.
Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.
The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machi
... Read morene requires brute force.
Once the hose was out I found some bra under wires which is what probably punctured the hose.
Removed the front filter and found a bunch of nails.
Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a
... Read more year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
