Models > WFW8400TW00

WFW8400TW00 Whirlpool Washer - Overview

Sections of the WFW8400TW00

[Viewing 6 of 6]

Manuals & Care Guides for WFW8400TW00

Click to download
Keep searches simple, eg. "belt" or "pump".
Washer Drain Pump – Part Number: WPW10730972
Washer Drain Pump
★★★★★
★★★★★
(104)
PartSelect #: PS11757304
Manufacturer #: WPW10730972
This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair o...
$150.51
  In Stock
Door Strike/Hook – Part Number: WP8540221
Door Strike/Hook
★★★★★
★★★★★
(13)
PartSelect #: PS11746261
Manufacturer #: WP8540221
Used to help make the door stay closed. Sold individually.
$12.18
  In Stock
Front Load Washer Bellow - Gray – Part Number: WPW10111435
Front Load Washer Bellow - Gray
★★★★★
★★★★★
(19)
PartSelect #: PS11748353
Manufacturer #: WPW10111435
Also known as a door boot seal.This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
$164.45
  In Stock
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$7.76
  In Stock
Screw – Part Number: WP488729
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742721
Manufacturer #: WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$7.91
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
  In Stock
HOSE – Part Number: W11366249
HOSE
★★★★★
★★★★★
(7)
PartSelect #: PS12723931
Manufacturer #: W11366249
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens ...
$34.21
  In Stock
Water Inlet Valve – Part Number: WP8540751
Water Inlet Valve
★★★★★
★★★★★
(11)
PartSelect #: PS11746288
Manufacturer #: WP8540751
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of water needed.
$72.37
  In Stock
Door Lock Latch – Part Number: WPW10253483
Door Lock Latch
★★★★★
★★★★★
(3)
PartSelect #: PS11751211
Manufacturer #: WPW10253483
This part ensures that your door stays locked while the machine is running.
$146.80
  In Stock
Washer Dispenser Hose – Part Number: W11366227
Washer Dispenser Hose
★★★★★
★★★★★
(8)
PartSelect #: PS12723930
Manufacturer #: W11366227
This dispenser hose is for washers and carries the contents of the dispenser drawer to the washer tub.
$28.66
  In Stock
Drive Belt – Part Number: WP8540101
Drive Belt
★★★★★
★★★★★
(13)
PartSelect #: PS11746258
Manufacturer #: WP8540101
This part is the replacement drive belt for your washer. It is made of black rubber and is approximately ½ an inch wide and 48 inches long. It has 6 grooves and is sold individually. The drive belt is...
$50.31
  In Stock
Bellow To Tub Clamp – Part Number: WP8540108
Bellow To Tub Clamp
★★★★★
★★★★★
(3)
PartSelect #: PS11746259
Manufacturer #: WP8540108
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place o...
$28.52
  In Stock

Questions And Answers for WFW8400TW00

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the WFW8400TW00

[Viewing 15 of 15]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Engine runs but does not pump water
Fixed by
these parts
Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Not draining
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
F 21 error
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
Parts Used:
Washer Drain Pump
  • Andrew from St.Louis, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
369 of 413 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak from bottom of door.
I discovered water leaking from the bottom of the door on our Kenmore front load washer. I did a little self diagnosis from the internet and found that this seems to be a common problem for front load Kenmore washers and that the ususal suspect is the large rubbery bellows. I examined the bellows on my washer and although I didn't find anything wrong with it, I couldn't find any other likely causes. I shopped around and found PartSelect to be the cheapest for the replacement part. Removal is easy by removing the lower front panel with three small screws on the bottom front, then remove the very top panel and then the top front control panel and finally the door panel. the bellows are actually held in place with a spring loop on the outer and a screw tightener on the inner, both are fairly easy to remove and the bellows comes right off. For installation my best advice is to lube the bellows with a small amount of dishwashing soap in the groove that fits on the washer tub. This will help it slide into place and enables a small amount of sliding fine tuning once it is on. From there it is just a reverse of the removal.
Parts Used:
Front Load Washer Bellow - Gray
  • Marty from Belfair, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
200 of 221 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water pump failed
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
Parts Used:
Washer Drain Pump
  • Kurt from Caliente, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
92 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!