Models > WFU17FC4CW0

WFU17FC4CW0 Westinghouse Freezer - Overview

Get Parts and Repair Help for WFU17FC4CW0

If you know the freezer repair part you need, you can browse the list of all parts on the WFU17FC4CW0, or you can search by name or part description. You can also find your part by where it is located on the WFU17FC4CW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for WFU17FC4CW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WFU17FC4CW0 [Viewing 4 of 4]

$11.73

Thermostat

This thermostat regulates and keeps the temperature at a constant temperature for the freezer section.

$6.68

Freezer Door Key

This metallic freezer door key is used for most upright or chest freezers.

$19.96

Defrost Timer - 120V

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

$85.07

Door Gasket

This white door gasket is used to seal the freezer door when closed.

$23.91

Evaporator Fan Blade

$4.16

Touch Up Paint

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$37.43

Evaporator Fan Motor with Wire Harness - 115V

This evaporator fan motor is located in the back of the freezer, and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$5.20

Hexagonal Screw

$4.38

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Faulty Controller and Possibly Capacitor

  • Customer: eric from inglewood TN
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 21 people found this instruction helpful
After building a test box and determining the Controller was bad simply ordered parts and installed. Installation was a little difficult due to locking spades on electrical connections.

Unplug all power from freezer. Remove Bail wire from controller capacitor unit and remove from compressor by pulling STRAIGHT from compressor body to avoid b... read more

Ice and frost were forming in a frost free freezer

  • Customer: Louise from Ocala FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 16 of 21 people found this instruction helpful
The old gasket was obviously gapping, partially from age and partially from damage during a move. To make the repair, I loosened the screws that are under the gasket and hold it in, but did not remove them. Once all were loose, I removed the old gasket, then starting at the top, ran a thin bead of food grade RTV under the portion of the door that captures ... read more

freezer compressor ran continuously and freezer getting colder and colder.

  • Customer: john from hurst TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
Repair was quick and easy. I removed the frozen food in the bottom so the back panel could be removed. The temperature comtrol is attached to the back of that panel. It has a metal wire with a capillary tube on the end to sense the temperature. I just installed it exactly like the old one came out. Be sure and don't get the wires mixed up. Someti... read more