Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WFU14K2BW1

WFU14K2BW1 Westinghouse Freezer - Overview

Get Parts and Repair Help for WFU14K2BW1

If you know the freezer repair part you need, you can browse the list of all parts on the WFU14K2BW1, or you can search by name or part description. You can also find your part by where it is located on the WFU14K2BW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WFU14K2BW1

[Viewing 4 of 4]

Manuals & Care Guides for WFU14K2BW1

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.62

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to t...

$7.51

Single Gasket Retainer Clip

This genuine OEM freezer gasket retainer clip is used on refrigerator freezers, and connects the inner door panel and door gasket to the outer door panel. The gasket is the rubbery strip that seals the space around the edge of the door to keep warm air out of the freezer. When the gasket is not working properly, you may notice an excessive frost buildup or reduced cooling. If the gasket is hanging loosely from the door, the issue could be with the retainer, or the clip fastening the retainer to the gasket, and it should be replaced.

$6.42

Hexagonal Screw

Sold individually.

$5.62

SCREW

Sold Individually.

$8.70

Shelf Support - Left Side

This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are s...

$8.70

Shelf Support

This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is not leveled and is unstable, changing this part could be the solution. Make sure to unplug the refrigerator from the power source before beginning this replacement project and safely store your food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

$5.29

RAMP

$31.76

SWITCH

This part turns the light on/off as the door opens and closes.

$23.38

CONTROL-TEMPERATURE

This thermostat regulates the temperature of the freezer cabinet.

$9.42

Filter - Drier

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the refrigerator is not getting cold, the issue could be due to a damaged or faulty filter-drier. Faulty filter-driers are sometimes the cause for abnormal freezer compartment temperatures and partially frosted evaporators. This filter-drier is approximately 11 inches long. Remember to disconnect the power from your refrigerator before beginning this repair.

Common Symptoms of the WFU14K2BW1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bad gasket let ice form on inside of door

  • Customer: alfred from college station, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 33 of 37 people found this instruction helpful
its best to use power screw driver lot of screws .took out all screws took off door took out side to remove ice from door. just used water to melt ice. took off old gasket and put on new gasket. put door in place and started screws in four coners do not tighten screws at this point.put in rest of screws. work arondclock wise making sure gasket is seated whil... read more

leaky freezer gasket

  • Customer: James from Shelby, MI
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 18 of 24 people found this instruction helpful
Simply unscrew panel but do not remove it. Remove old gasket. Fit new gasket between panel and door. Fasten screws and no more leaks and better temperature contol. This was so easy and rejuvenated my freezer. Thank you for quick shipment, great service, easy to navigate website, and fast phone help. I highly recommend your company. good luck with your repair... read more

Freezer would not shut off unless unplugged.

  • Customer: Carol from Marquette, MI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 21 people found this instruction helpful
Removed old cold temperature control; tested with ohm meter and determined that the control was bad; ordered new cold control from PartSelect.com. Installed new cold temperature control with no problems; freezer is now running like new again!
p.s. I was very pleased with how fast I received my order from PartSelect.com! read more