Models > WFU14K2BW0

WFU14K2BW0 Westinghouse Freezer - Overview

Get Parts and Repair Help for WFU14K2BW0

If you know the freezer repair part you need, you can browse the list of all parts on the WFU14K2BW0, or you can search by name or part description. You can also find your part by where it is located on the WFU14K2BW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WFU14K2BW0 [Viewing 4 of 4]

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$87.11

Door Gasket

This white door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.

$5.20

Hexagonal Screw

$4.38

SCREW

$6.43

Single Gasket Retainer Clip

Sold Individually.

$29.18

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$7.25

Shelf Support

$7.36

Shelf Support

$16.64

CONTROLLER KIT

$26.93

SWITCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Faulty Controller and Possibly Capacitor

  • Customer: eric from inglewood TN
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 23 people found this instruction helpful
After building a test box and determining the Controller was bad simply ordered parts and installed. Installation was a little difficult due to locking spades on electrical connections.

Unplug all power from freezer. Remove Bail wire from controller capacitor unit and remove from compressor by pulling STRAIGHT from compressor body to avoid b... read more

bad gasket let ice form on inside of door

  • Customer: alfred from college station TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 17 of 19 people found this instruction helpful
its best to use power screw driver lot of screws .took out all screws took off door took out side to remove ice from door. just used water to melt ice. took off old gasket and put on new gasket. put door in place and started screws in four coners do not tighten screws at this point.put in rest of screws. work arondclock wise making sure gasket is seated whil... read more

leaky freezer gasket

  • Customer: James from Shelby MI
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 13 people found this instruction helpful
Simply unscrew panel but do not remove it. Remove old gasket. Fit new gasket between panel and door. Fasten screws and no more leaks and better temperature contol. This was so easy and rejuvenated my freezer. Thank you for quick shipment, great service, easy to navigate website, and fast phone help. I highly recommend your company. good luck with your repair... read more