Models > WFU11FC2CW5

WFU11FC2CW5 Westinghouse Refrigerator - Overview

Get Parts and Repair Help for WFU11FC2CW5

If you know the refrigerator repair part you need, you can browse the list of all parts on the WFU11FC2CW5, or you can search by name or part description. You can also find your part by where it is located on the WFU11FC2CW5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WFU11FC2CW5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WFU11FC2CW5 [Viewing 4 of 4]

$11.73

Thermostat

This thermostat regulates and keeps the temperature at a constant temperature for the freezer section.

$19.96

Defrost Timer - 120V

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

$23.91

Evaporator Fan Blade

$4.16

Touch Up Paint

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$37.43

Evaporator Fan Motor with Wire Harness - 115V

This evaporator fan motor is located in the back of the freezer, and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$4.38

SCREW

$6.43

Single Gasket Retainer Clip

Sold Individually.

$83.62

Door Gasket

This white door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.

$18.32

KNOB

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Temp alarm sounding and food on top shelves partially thawed

  • Customer: Wayne from Forest Hill MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 12 people found this instruction helpful
After silencing the alarm, it seemed to be running as normal without any unusual noises, but food was starting to thaw from the top shelf on down and condensation was dripping from the roof. We were able to place most of the food in 2 large ice chests and then the rest in the freezer compartments of 2 fridges we have in the house. I then turned down the te... read more

ice was accumulating around door

  • Customer: Cindy from Woodinville WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Removed all of the screws around the door and then removed the old gasket and fitted new gasket into place and replaced the screws read more

freezer was stuck in defrost mode - - stayed at 30 degrees

  • Customer: don from stony point NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 18 people found this instruction helpful
slid freezer away from wall - - bottom left hand corner was the frost timer - - removed two philip head screws - - unpluged timer and installed new timer - - turned timer past first click to a little past second click (freeze cycle) - - slid freezer back FINISHED - - YOU GUYS ARE THE BEST WITH YOUR WEB PAGE AND HELP!!!!! Next day freezer was at 0 read more