Models > WFC7500VW1

WFC7500VW1 Whirlpool Washer - Overview

Get Parts and Repair Help for WFC7500VW1

If you know the washer repair part you need, you can browse the list of all parts on the WFC7500VW1, or you can search by name or part description. You can also find your part by where it is located on the WFC7500VW1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$4.65

Touch-Up Paint - White

$7.54

Spray Paint - 12 oz. - White

$87.46

BELLOW

$36.11

HANDLE

$144.79

PUMP-WATER

$46.77

LATCH

$31.73

HANDLE

$15.01

SWITCH

$97.07

KIT-STACK

$56.52

DISPENSER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 14 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Both outside door handles turned very beige

  • Customer: Howard from Boynton Beach FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 4 of 12 people found this instruction helpful
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles.... read more

Front load washer - water was leaking because the door seal had a tear.

  • Customer: Ingrida from Boston MA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Found a repair manual online. Followed instructions how to remove the door, front cover, took clamps off. Then attached the back side of the new bellow to the plastic drum, put clamp on and fasten the screw. Make sure the water draining hols are at the bottom (6 o'clock). Put the front cover back, screw everything back including the door lock. Then attach t... read more