Models
>
WF45B6300AP
WF45B6300AP ((US-00)) Samsung Washer - Overview
Sections of the WF45B6300AP
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Hex Head Bolt
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing...
$11.94
In Stock
Outer Seal Clamp
PartSelect #: PS4218211
Manufacturer #: DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made o...
$17.35
In Stock
VALVE-WATER;V-0117,NYLON
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$89.85
In Stock
Washer Bolt Assembly
PartSelect #: PS4217876
Manufacturer #: DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
$13.62
In Stock
CAP-DRAIN;SWF-P12,PP,-,-
PartSelect #: PS4207510
Manufacturer #: DC61-10673A
This drain cap is a genuine replacement part made for Samsung washers. It is a small plastic cap, approximately 1.5 inches long, that fits onto the end of the washing machine drain hose. The cap is re...
$4.18
In Stock
DOOR DIAPHRAGM;WF6000R,TPE,T2,ER7735DA,D
PartSelect #: PS12720638
Manufacturer #: DC64-03788A
This Samsung door diaphragm, commonly referred to as a door boot or door seal, is compatible with various models of Samsung washing machines. It is positioned around the opening of the washer where it...
$136.66
In Stock
Questions And Answers for WF45B6300AP
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WF45B6300AP
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Parts Used:
-
Samuel from NEEDVILLE, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench set
9 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!