Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WES1450DM1BB

WES1450DM1BB General Electric Microwave - Overview

Get Parts and Repair Help for WES1450DM1BB

If you know the microwave repair part you need, you can browse the list of all parts on the WES1450DM1BB, or you can search by name or part description. You can also find your part by where it is located on the WES1450DM1BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WES1450DM1BB

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.


Roller Guide

This roller guide sits underneath the glass turntable tray.


Common Symptoms of the WES1450DM1BB

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Glass dish would not rotate.

  • Customer: Michael from Irwin, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
AFter I put the roller guide and glass cooking tray inside the microwave it still didn't spin. After check with the video, I was warned not to try to replace the motor which spins the tray, that there was a chance of electrical shock. I took the oven to my repair place and they made the repairs. read more

wheel was not turning rotisserie table

  • Customer: Marie from Pentwater, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First I took out the screws holding the sides and back to the microwave. I discovered that the rotissereie motor was also damaged, but had an old GE microwave that had quit working-took out motor from other GE(motor was the same), installed motor in microwave, lined up pin to roller assy. and that was it! read more