WEF365BHWB Westinghouse Range - Instructions

Popped out the old...snapped in the new. All of about 5 minutes or less.

Ordered the replacement glide, received pretty quickly! : ) Snapped the broken part out with screw driver and popped the replacement glide in with my thumb! 1,2,3.... Pretty Happy!

Replaced the guides by following the instructions in the Video provided on the part information page. Really simple.

I watched the video on your web site, and it couldn't have been any easier. This is the second major appliance that I've repaired using this web site, and your instructions have been perfect each time, as well as parts cost. I can't get parts at any lower cost including shipping! Excellent resourse here!!!

repaired in 5 minutes with my nut driver. So, so, so easy to make this repair. And never even attempted to call an electrician. Since long before I became an official widow, I say...who needs a man...

I watched the repair tutorial and followed the instructions. The order went very well and the tutorial was spot-on. Nice.

Unscrewed the two screws which held element in place...pulled straight out...gently pulled connector terminals off....replaced with new element connecting element terminals ...sliding element back into place (make sure terminal connection is straight (ie NOT BENT) when pushing element back into original position)and screwing screws back in...DONE!!! EASY PEASY!!!

removed the screw at the mount on each side of element .pulled old element straight out untill wire connector was out at the back of oven ..unplugged wire connector from each end of old element ..plugged wire connectors back into new element .pushed element plugs back into back of oven and installed each screw that holds element into place.. real simple

The video was a great help. I could have replaced the switch without watching it, but it gave me confidence that I was doing it right. Everything went just like he said it would. Burner seems to work better now and no more scary noises.

aftering watching your repair video the repair went very well we took the oven door off to make access easier. the worst part of the repair was getting the door back on.

Undo the two nut screws pulled out the element and replaced it with the new one.

Followed instructions on YouTube and Frgidaire website. It looked easy; was easier than it looked -)

Removed old element by taking out two screws at bottom rear of oven. Pulled element and wires forward from two holes and unclipped from wires. Clipped new element to wires and pushed the wires back into the holes. Then replaced the two screws. Needed flashlight so that 60+ eyes could see the screws and holes in the oven. A quick and inexpensive repair. Element was delivered very quickly.

took the two nuts off the back wall of the stove and disconnected the push on terminals. ordered by model number. replaced and reinstalled the two nuts in stove. simple as possible

Unplugged stove. Quickly unscrewed back panel (4 screws). Popped the wires off one at a time attaching them to the new switch. Pulled the knob off the front, unscrewed screws, and put new switch in repeating previous steps in reverse. Put the panel back on, plugged it up, and pushed it back into place. Done.