Models > WEF365BHDB > Instructions

WEF365BHDB Westinghouse Range - Instructions

All installation instructions for WEF365BHDB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WEF365BHDB
586-587 of 587
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven bake element burned out-no heat

  • Customer: Mark from Laurel MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It is critical that the power be turned off AND the oven unplugged for safety. This should also be included as a big warning note in the element packaging. This repair is extremely unsafe if power is not disconnected. In my case the plug was accessible by removing the warming drawer. Once power is off, simply remove two 1/4" screws with nut driver and pull the element out slightly to access connectors. Disconnect, while not allowing wires to fall back through holes at rear of oven. Connect new element and slide back into place, replace screws. I also replaced a broken warming drawer slide while I was at it, it just snaps into place.

oven does not heat

  • Customer: DeWitt from Boulder CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Disconnected the heating element from oven box (nutdriver), pulling element outward toward the oven door to expose the element's push-on electrical terminals for voltage measurement. Used paper to insulate terminals from oven box while setting oven to "bake." Determined that electrical power (230 VAC) was present; then switched off oven and double checked the element itself was open circuit by measuring continuity with one terminal disconnected. (Violated all kinds of safety rules!) Temporarily reinstalled the bad element to maintain safe condition while waiting for replacement element. Be careful with delicate push-on terminals to avoid connectors coming off wires.
All Instructions for the WEF365BHDB
586-587 of 587