Models > WEF365BHDB

WEF365BHDB Westinghouse Range - Overview

Get Parts and Repair Help for WEF365BHDB

If you know the range repair part you need, you can browse the list of all parts on the WEF365BHDB, or you can search by name or part description. You can also find your part by where it is located on the WEF365BHDB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WEF365BHDB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$29.16

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$3.51

Front Drawer Glide

Sold individually.

$3.96

Rear Drawer Glide

Sold individually.

$21.41

Infinite Burner Switch - 8" - 240V

$8.08

ANTI TIP KIT

$3.51

Main Terminal Block Kit

$44.14

Oven Rack

Sold individually.

$24.52

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$26.07

Inner Oven Door Glass Panel

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 478 of 483 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 505 of 591 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

drawer glides were broke on front and back

  • Customer: bryan from sparta WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 459 of 459 people found this instruction helpful
used a screwdriver pushed the old ones out put the new in. the video instructions were great. read more