Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WEF351ESB

WEF351ESB Westinghouse Range - Overview

Get Parts and Repair Help for WEF351ESB

If you know the range repair part you need, you can browse the list of all parts on the WEF351ESB, or you can search by name or part description. You can also find your part by where it is located on the WEF351ESB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WEF351ESB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$8.01

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$22.86

Infinite Burner Switch - 8" - 240V

This switch controls the stove top 8" surface burner.

$11.78

Surface Element - 8" - 220V

4 Turn.

$7.72

Drip Bowl - 8"

$5.78

Drip Bowl - 6"

$26.60

Oven Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$23.28

Surface Element - 6"

Sold individually.

$26.93

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$6.44

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 940 of 973 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 659 of 753 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 410 of 419 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more