Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WEF303PHWA

WEF303PHWA Westinghouse Range - Overview

Get Parts and Repair Help for WEF303PHWA

If you know the range repair part you need, you can browse the list of all parts on the WEF303PHWA, or you can search by name or part description. You can also find your part by where it is located on the WEF303PHWA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WEF303PHWA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$5.26

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$4.52

Chrome Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$8.01

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$11.78

Surface Element - 8" - 220V

4 Turn.

$6.13

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

$23.28

Surface Element - 6"

Sold individually.

$17.48

Broil Element

This broil element is found on the roof of the oven.

$22.30

Burner Switch Kit

This switch controls the stove top surface burner.

$50.63

Oven Rack

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 915 of 948 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 652 of 746 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 409 of 418 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more