Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WED9200SQ0 > Instructions

WED9200SQ0 Whirlpool Dryer - Instructions

All installation instructions for WED9200SQ0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WED9200SQ0
121-135 of 214
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the lint filter needed to be replaced

  • Customer: Kathleen M from McDonough, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I took the old filter out and placed the new one in the same spot.

Dryer Makes Loud Noise

  • Customer: Danny from New Albany, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Had to unstack the unit took it apart and replace the rollers,Belt and Idler Pulley It was the pulley making the noise but I had it a part and for the cost I replace the rollers and the Belt the Job was easy The Washer and Dryer are Great we run about 2 Loads a Day

Door keeps opening while clothes are drying

  • Customer: Patrick from Sanford, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I watched the video and after that made the repair, it was very easy and the video was a really big help. From start to finish it took me no longer than 10 minutes.

Loud screeching noise coming from dryer

  • Customer: Bert from Las Vegas, NV
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
After removing the back & top of the dryer,I determined the noise was coming the idler pulley.I went online w/ model # & found Partselect.com.I ordered the dryer repair kit (at my door in 3 days) which included all the rollers,idler pulley, belt & hardware.It was an easy job to do even tho instructions were for top control panel model (mine is a whirlpool duet- front control) I did try using silicone lubricant on idler pulley, which worked to quiet dryer for a couple days so my wife could use it while I was waing for parts.Two thumbs up to Partselect.com,I will be purchasing all my appliance repair parts from them..I own all whirlpool stainless steel appliances that have been very reliable,but it's nice to know I have Partselect to fix problems as needed.

right part easy

  • Customer: JOHN from LAUREL, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
self...right part thank you

Felt came loose on lint screen.

  • Customer: mary from enola, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
ILove your service. The part came in 3 days. Best parts service I have ever found. I was told by the dealer it would take 2 weeks to come in.

Dryer wad making squeaking noise

  • Customer: Thomas from Spring Grove, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Wrench set
  • 0 of 0 people found this instruction helpful
Thank you for your part service. It saved me about $ 200.00 dollars by Sears not coming out to repair a simple problem.

broken drive belt

  • Customer: Andrew C from West Springfield, MA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
after watching the instuctional installation video, it real took about 25 to 30 mins to install the new belt. The video was perfact and made the installation so easy..

Dryer kept shutting off after 10-15minutes

  • Customer: Neal from Bertha, MN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Took off front bottom panel reached in removed part that was very dusty. Put in new part. Cleaned out lint inside dryer. Works like a charm.

lint filter housing cracked

  • Customer: Richard from Sanford, ME
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
open dyer door replace lint filter perfect fit, good price, fast delvery. thank you

the fan was stuck to the motor shaft

  • Customer: West from Sycamore, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I tried to use antisieze on the bolt and left it on for several days. Ended up drilling out the center of the shaft on the drill press to heat up the parts (not enough to melt the fan). This allowed me to loosen the fan and remove it. The rest of the installation went smooth.

Dryer would randomly stop running mid-cycle

  • Customer: Mike from Monroe, AL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The hinge is held on with screws. You just need to separate the front and rear sides of the door skin to get at the screws that hold the hinge onto the door frame. The screws are Phillips-head and are located on the inner-facing door. Once you have access unscrewing the hinge from the door is simple, and then you can unscrew it from the dryer's frame. Or, you could unscrew it from the frame first and then disassemble the door on a workbench, etc. Once the new hinge was installed the slop in the mechanism went away and there were no more false "door open" events. You can test for this by pushing on the door on the hinge side while it's closed- I was able to get the drum light to come on, indicating that there was sufficient play in the hinge to falsely trip the door-open switch. After replacing the hinge the issue went away.

Belt pulley frequently squealed loudly

  • Customer: WILLIAM from HOUSTON, TX
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
My way of replacing the pulley was much faster than the parts select video that showed how to replace the belt tension-er pulley. They took off the door, the entire front AND the drum to get to the pulley. I ACCESSED THE PULLEY BY REMOVING THE 4 INCH EXHAUST PIPE, (ONE SCREW) WHICH GAVE MORE THAN ENOUGH OPENING TO REPLACE THE NEARBY PULLEY! I suggest you remake that video

The leveling foot on my dryer broke.

  • Customer: Diana from Clifton, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We only had to tilt the dryer enough to be able to screw the leveling leg in place.The only hard part was holding the dryer steady to screw in the leveling foot.

Suspected bad moisture sensors

  • Customer: David from Sussex, WI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Opened machine up, removed electric control panel, removed door assembly, removed lint collector assembly, removed and replaced 2 sensor bars then reassembled machine. Ended up not being the problem but, I now have new moisture sensing bars.
All Instructions for the WED9200SQ0
121-135 of 214