Models > WDSR2080G0WW

WDSR2080G0WW General Electric Washer - Overview

Get Parts and Repair Help for WDSR2080G0WW

If you know the washer repair part you need, you can browse the list of all parts on the WDSR2080G0WW, or you can search by name or part description. You can also find your part by where it is located on the WDSR2080G0WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WDSR2080G0WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.71

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.

$13.89

Control Knob - White

This knob accepts a D shaped shaft. Sold Individually.

$3.68

Timer Knob

White in color.

$9.75

Drain Hose Extension - 4 1/2' Long

$3.27

Timer Knob Clip

$2.62

Dial with Compression Ring

$5.54

V-Style Drive Belt

$3.00

Drain Hose Clip

This clip holds the drain hose to the back of the washer.

$7.23

Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace ...

$53.39

Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Control knob teeth were worn

  • Customer: Charles from Dallas GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 464 of 464 people found this instruction helpful
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed. read more

The original Knob just fell apart

  • Customer: Irina from Englewood NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 363 of 365 people found this instruction helpful
The repair was so easy when I got the part, I did it myself without any help in 5 seconds! read more

Washing Machine was not draining water from tub.

  • Customer: Gerald from Midlothian VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 155 of 165 people found this instruction helpful
1. Drained the wash tub by taking the drain hose from the back of the washing machine and dropping it below the tub - water flowed out of hose a lot easier than trying to suck water out of tub using a pump (tried this on the first time I tried to fix washer). (Washing machine on 2nd floor of house and didn't want water running on floor)
2. Removed the... read more