Models > WDF310PLAW1

WDF310PLAW1 Whirlpool Dishwasher - Overview

Get Parts and Repair Help for WDF310PLAW1

If you know the dishwasher repair part you need, you can browse the list of all parts on the WDF310PLAW1, or you can search by name or part description. You can also find your part by where it is located on the WDF310PLAW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for WDF310PLAW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$8.07

Mounting Bracket

Sold individually.

$3.76

Rack Track Stop

Used for upper dishrack track.

$50.27

Door Gasket with Strike - Black

The gasket provides a seal between the tub and the door. The door strike serves as a mechanical actuator for door switch operation and provides door tension for proper seal.

$36.72

Heating Element

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher and also comes with the 2 washers.

$19.21

Upper Adjustable Rack Wheel - 2 Positions

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$50.96

PUMP-DRAIN

$3.83

RETAINER

$2.70

Hose Clamp

$5.54

Touch-Up Paint - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dishwasher not draining after wash cycle

  • Customer: Andrew from Alexandria VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 92 of 100 people found this instruction helpful
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
... read more

Heater element broken.

  • Customer: Dennis from Sedro Woolley WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 51 of 56 people found this instruction helpful
Step 1: Remove the screws in the bottom of the countertop.

Step 2: Remove the screws holding the bottom kickplate.

Step 3: Loosen leveling legs.

Step 4: Pull dishwasher out of hole.

Step 5: Unlplug dishwasher.

Step 6: Disconnect wires from bottom of element in back.

Step 7: Remove plastic nuts... read more

The door gasket stuck to the door a pulled out of place after every use

  • Customer: Penny from Manchester MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 58 people found this instruction helpful
Worked the new gasket into the groove with a smooth screwdriver and my fingers. No leaks and it stays in place. Parts Select had the right part and I got it fast read more