WDB745REB1 Westinghouse Dishwasher - Instructions

befor I got home from work,6 year GS fix it.

I removed the screws from the inside of the dishwasher door to allow access to the inside of the door. Once the exterior of the door is removed the detergent dispenser is easily removed by disconnecting 6 screws and unplugging two wires from the unit. The new unit slips in and is easily reconnected. Getting the exterior of the door reinstalled is a bit challenging, but once you figure out that the exterior needs to slide up to allow the catches on the door to grab, reinstallation is easy. A second pair of hands makes this easier.

The part fits exactly with no modifications necessary.

The new spray arm snapped into place.

Unscrew all the scews arround it. Use tape to hold the eletronic panel. Remove the metal cover.
Remove the 6 screws around the dispenser. Replace the new one. Put the metal cover back first. Put back the electronic panel at last. Done

replace the door gasket

Took less than 10 minutes. It took longer to order the part than install it. Great company, ordered on a Saturday, had the part on Wednesday.

Rollers just snapped on the diswasher rack. Took just seconds to do.

Replaced spring on door

rack came (with wheels attached,to my surprise) and we placed it in the machine - works great!

Simple pull out, and then replaced with new unit.

My Son used needle nose pliers to remover the old gasket, then starting on the lower right side, inserted the new gasket and used the rounded end of handle of a wooden spoon and pressed the gaste in place by running the handle up and around the top then down the left side. Used sissors to cut the new gasket to length. Door fit very tight. Ran a normal wash cycle and no leaks.

took out screws around door, took off hinges, slip new seal in put hinges back on screws around door. does not leak

Remove the inner door panel, plastic, has 8 screws, unplug the dispenser compartment, and do the reverse. This was very easy. Thanks partselect!!!!!!!

Removed door gasket then replaced bottom gasket

After checking various forums and advice, the suggested repair was a new water inlet valve. It was easy to change but I wasted $30 as it did not cure the problem. Dishwasher is only 2 years old and is cheaper to replace then have someone come and look at it. So it did not fix the problem, but I recommend Parts Select, the price was fair and part arrived very quickly.