Models > WDB11NRDS2 > Instructions

WDB11NRDS2 Westinghouse Dishwasher - Instructions

All installation instructions for WDB11NRDS2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WDB11NRDS2
211-225 of 284
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower spray arm damaged - making noise

  • Customer: Robert from Marshfield MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
removed spray arm, located damaged ears on spray arm, ordered the part, received it in 2 days (wow great service)and installed it the same day.

Leaking at the door

  • Customer: John from Hammonton NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just pulled the old one out and installed the new.

Water inlet valve leak

  • Customer: Marshall from Newnan GA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Repaired with installation instructions from PARTS-SELECT. Worked perfect!

dishwasher door was leaking.

  • Customer: Dean from Boscobel WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled out the gasket,trimmed the gasket to fit and alittle pressure to put.it in place, very easyto do. No worries any one can do this and savek yourself costly repair person.

Leaky inlet valve

  • Customer: Lance from Chandler AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Cakewalk, replacing a water inlet valve is self-explanatory. Take the old one off, put the new one on .. that's pretty much it.

Water leaking from dishwasher

  • Customer: Steven from Buffalo NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The bottom gasket was really delivered quickly for the Xmas season. Watched the online video for removing and replacing the Bottom Gasket. Five minutes later was loading dishwasher for the trail run. No leaks dishwasher back online.

leaking

  • Customer: Juan from Cumming GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced bottom and tub gasket

The dishwasher was leaking.

  • Customer: Michael from Noblesville IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced the bottom gasket and the tub gasket. replacing them both was very easy. I pulled the tub gasket out by using a screw driver and popping out a section then pulled it out. Installed new one by just pushing it in. Bottom gasket was simple as well. There was a notch in the gasket on the right side so you can't screw it up on which side goes where. Pulled the old one out and pushed the new on in. I found it easier to install the right side with the groove first. Both gaskets helped. However dishwasher was still leaking. Another person had mentioned that the spinner that shoots the water on the bottom, had a hole in it and was shooting water towards the door. I examined both of them and found that the bottom one had a bigger hole on the very end. It looked like it hit something and made the hole bigger. I temporarily put duct tape over it and it has't leaked. Plan on ordering the new part today.

melted hole in lower arm

  • Customer: Jon from Lafayette CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
ordered and replaced in 5 minutes

sprayer arm came apart

  • Customer: jeffrey from North Richland Hills TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just had to remove arm and reinstall the new one.That is not hard the great thing was that I tried to call sears repair store,45min.no answer so I drove to it. They didnt have part but could order it from frigidaire would take 10 days and 12.99 shipping. I came home checked Frigidaire website, same price and shipping.Then I looked on your website part was half the price and less than have for shipping. Received the part in two days and that included New Years day. Excellant business and super savings.thanks

Dishwasher was leaking water onto the floor

  • Customer: miles from hoboken NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I viewed a very short video on how to replace the lower gasket on the website which was extremely useful. I then ordered the part via standard shipping and it arrived very quickly. I used the flat head screwdriver to gently loosen the old gasket which has mineral buildup on it and was stuck into place. Sliding the new one in was a snap. This was one of the best sites as you could search for the part by describing the problem. I would definitely use it again!

Water leaking from the washer

  • Customer: Charles from Mount Pleasant TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
R&R the tub gasket and the door gasket. Repair not effective, it still leaks.

Water leaking from bottom center of door

  • Customer: James from Pollock Pines CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Ordered a bottom gasket and replaced it. Started dishwasher and had same leak. Found out that the lower spray arm had a hole in it from the heating element and was spraying water directly at lower part of door. Replaced lower spray arm, problem solved!!

spray arm broken

  • Customer: Almir from Forest Hills NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
removed old part and slide new one in , so simple

dishes not drying -- water not heating

  • Customer: Judy from Miles City MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took bottom panel off dishwasher -- used stubby screwdriver to remove bracket from old thermostat, intalled and connected new thermostat, replaced bracket -- easy. Parts schematic on website made locating and replacing part very simple.
All Instructions for the WDB11NRDS2
211-225 of 284